Window Energy Ratings Explained (A++ to E)

When you shop for windows you’ll see a colourful label much like the one on a fridge or washing machine. That’s the Window Energy Rating (WER), and understanding it helps you compare products fairly and avoid overpaying for marketing claims. Here’s everything you need to know.

Who runs the scheme

The rating is administered by the British Fenestration Rating Council (BFRC), the UK’s national system for rating the energy efficiency of windows. Ratings run from A++ (best) down through A+, A, B, C and so on to E. It’s an independent, standardised scheme, so an A-rated window from one firm is comparable to an A-rated window from another.

What the rating measures

The WER combines three things into a single grade:

  • Heat loss (U-value): how much warmth escapes through the window — lower is better. See our U-value guide.
  • Solar gain (g-value): useful free heat from the sun coming in.
  • Air leakage: how well the window resists draughts.

Because it balances heat lost against heat gained, the WER gives a fuller picture than the U-value alone — a window can let warmth escape but claw some back from the sun.

What’s inside an energy-efficient window

High ratings come from a combination of a low-E coating, an argon-filled gap, a warm-edge spacer bar and a well-insulated frame. None of these is magic alone; together they lift a window to an A rating. If a quote is unusually cheap, check it actually includes these rather than plain glass.

What rating should you choose?

Building regulations set a minimum standard for replacement windows, so any reputable installer will meet at least that. A-rated windows are a sensible, widely available sweet spot for most homes. Going beyond that (A+ or A++, or triple glazing) gives diminishing returns unless the rest of your home is highly insulated — if your budget is limited, spend the extra on loft and wall insulation first.

Rating vs real-world performance

A great rating only delivers if the window is fitted well. A top-rated window installed with gaps and poor sealing will underperform a modest one fitted properly. So the energy label and a quality installer go hand in hand.

Reading the label

Ask the installer to confirm the rating in writing and whether it’s a genuine BFRC-certified rating or a manufacturer’s own figure. A certified rating lets you compare products from different firms with confidence — and ties into the EPC improvements that matter when you sell.

How the rating affects your EPC and bills

Window ratings don’t exist in isolation — they feed into your home’s Energy Performance Certificate and your running costs. Replacing single glazing with A-rated windows lifts the glazing element of the EPC and cuts measurable heat loss, which matters increasingly to buyers, renters and some lenders. The saving on bills depends on your home, heating and how much glazing you have, but the direction is always the same: a better rating means less heat escaping. Think of the label as a comparison tool at the point of buying, and the EPC as where that choice shows up later.

Don’t chase the label at the expense of fit

A common mistake is to fixate on squeezing from A to A+ while ignoring the installation. In practice, a well-fitted A-rated window in a well-sealed opening will outperform a higher-rated window fitted with gaps and poor sealing. Spend your effort on a genuine BFRC rating plus a quality installer, and only reach for A+ or A++ if the rest of your home is already highly insulated. The label is a guide to the product; real-world warmth comes from product and fit together.

Related guides

Ready to get quotes? Find trusted local double glazing installers on our directory and compare them side by side — it’s free and there’s no obligation.

Sources & further reading

Get your business in front of homeowners

Add your double glazing business to the UK’s biggest fenestration directory — homeowners near you are searching for quotes right now.

Add your business
AdAdvertisement
Get free quotes